Skip to content
🐇

Hi naughty one! So you’d like to have fun with kinky 3D printed models?! You are right ;)

But on Cults, little bunnies have to prove they are grown up enough.

You must

Loyalty Cage (Now V2.3)
Hand-2-Cults.png Loyalty Cage (Now V2.3)
Hand-Cults.png Loyalty Cage (Now V2.3)
On-body.png Loyalty Cage (Now V2.3)
Share
Add to
?
Creation quality: 5/5 (3 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
5 files (ZIP) Close
  • Loyalty Cage (legacy).zip
    • Loyalty Cage L/Cage/Cage L Open.stl
    • Loyalty Cage L/Cage/Cage L.stl
    • Loyalty Cage L/Ring/Ring L.stl
    • Loyalty Cage L/Ring/Ring M.stl
    • Loyalty Cage L/Ring/Ring S.stl
    • Loyalty Cage M/Cage/Cage M Open.stl
    • Loyalty Cage M/Cage/Cage M.stl
    • Loyalty Cage M/Ring/Ring L.stl
    • Loyalty Cage M/Ring/Ring M.stl
    • Loyalty Cage M/Ring/Ring S.stl
    • Loyalty Cage S/Cage/Cage S Open.stl
    • Loyalty Cage S/Cage/Cage S.stl
    • Loyalty Cage S/Ring/Ring L.stl
    • Loyalty Cage S/Ring/Ring M.stl
    • Loyalty Cage S/Ring/Ring S.stl
  • Loyalty Cage V2.1.zip
    • Loyalty Cage L/Cage/Cage L (V2.1).stl
    • Loyalty Cage L/Cage/Cage L Open (V2.1).stl
    • Loyalty Cage L/Rings/Ring 48mm.stl
    • Loyalty Cage L/Rings/Ring 51mm.stl
    • Loyalty Cage L/Rings/Ring 54mm.stl
    • Loyalty Cage L/Rings/Ring 57mm.stl
    • Loyalty Cage L/Rings/Ring 60mm.stl
    • Loyalty Cage L/Rings/Ring 63mm.stl
    • Loyalty Cage M/Cage/Cage M (V2.1).stl
    • Loyalty Cage M/Cage/Cage M Open (V2.1).stl
    • Loyalty Cage M/Rings/Cage 48mm.stl
    • Loyalty Cage M/Rings/Cage 51mm.stl
    • Loyalty Cage M/Rings/Cage 54mm.stl
    • Loyalty Cage M/Rings/Cage 57mm.stl
    • Loyalty Cage M/Rings/Cage 60mm.stl
    • Loyalty Cage M/Rings/Cage 63mm.stl
    • Loyalty Cage S/Cage/Cage S (V2.1).stl
    • Loyalty Cage S/Cage/Cage S Open (V2.1).stl
    • Loyalty Cage S/Rings/Ring 48mm.stl
    • Loyalty Cage S/Rings/Ring 51mm.stl
    • Loyalty Cage S/Rings/Ring 54mm.stl
    • Loyalty Cage S/Rings/Ring 57mm.stl
    • Loyalty Cage S/Rings/Ring 60mm.stl
    • Loyalty Cage S/Rings/Ring 63mm.stl
    • Loyalty Cage XS/Cage/Cage XS (V2.1).stl
    • Loyalty Cage XS/Cage/Cage XS Open (V2.1).stl
    • Loyalty Cage XS/Rings/Ring 48mm.stl
    • Loyalty Cage XS/Rings/Ring 51mm.stl
    • Loyalty Cage XS/Rings/Ring 54mm.stl
    • Loyalty Cage XS/Rings/Ring 57mm.stl
    • Loyalty Cage XS/Rings/Ring 60mm.stl
    • Loyalty Cage XS/Rings/Ring 63mm.stl
    • Loyalty Cage XSS/Cage/Loyalty Cage XSS (V2.1).stl.stl
    • Loyalty Cage XSS/Cage/Loyalty Cage XSS Open (V2.1).stl
    • Loyalty Cage XSS/Rings/Ring 48mm.stl
    • Loyalty Cage XSS/Rings/Ring 51mm.stl
    • Loyalty Cage XSS/Rings/Ring 54mm.stl
    • Loyalty Cage XSS/Rings/Ring 57mm.stl
    • Loyalty Cage XSS/Rings/Ring 60mm.stl
    • Loyalty Cage XSS/Rings/Ring 63mm.stl
  • Loyalty Cage V2.2.zip
    • L/Cage L Open.stl
    • L/Cage L.stl
    • L/Ring L 48mm.stl
    • L/Ring L 51mm.stl
    • L/Ring L 54mm.stl
    • L/Ring L 57mm.stl
    • L/Ring L 60mm.stl
    • L/Ring L 63mm.stl
    • M/Cage M Open.stl
    • M/Cage M.stl
    • M/Ring M 48mm.stl
    • M/Ring M 51mm.stl
    • M/Ring M 54mm.stl
    • M/Ring M 57mm.stl
    • M/Ring M 60mm.stl
    • M/Ring M 63mm.stl
    • S/Cage S Open.stl
    • S/Cage S.stl
    • S/Ring S 48mm.stl
    • S/Ring S 51mm.stl
    • S/Ring S 54mm.stl
    • S/Ring S 57mm.stl
    • S/Ring S 60mm.stl
    • S/Ring S 63mm.stl
    • XS/Cage XS Open.stl
    • XS/Cage XS.stl
    • XS/Ring XS 48mm.stl
    • XS/Ring XS 51mm.stl
    • XS/Ring XS 54mm.stl
    • XS/Ring XS 57mm.stl
    • XS/Ring XS 60mm.stl
    • XS/Ring XS 63mm.stl
    • XSS/Cage XSS Open.stl
    • XSS/Cage XSS.stl
    • XSS/Ring XSS 48mm.stl
    • XSS/Ring XSS 51mm.stl
    • XSS/Ring XSS 54mm.stl
    • XSS/Ring XSS 57mm.stl
    • XSS/Ring XSS 60mm.stl
    • XSS/Ring XSS 63mm.stl
  • Loyalty Cage V2.3.zip
    • L/Loyalty Cage L (v2.3).stl
    • L/Loyalty Cage L Opened (v2.3).stl
    • L/Ring 45mm (V2.3 for L).stl
    • L/Ring 48mm (V2.3 for L).stl
    • L/Ring 51mm (V2.3 for L).stl
    • L/Ring 54mm (V2.3 for L).stl
    • L/Ring 57mm (V2.3 for L).stl
    • L/Ring 60mm (V2.3 for L).stl
    • L/Ring 63mm (V2.3 for L).stl
    • M/Loyalty Cage M (v2.3).stl
    • M/Loyalty Cage M Opened (v2.3).stl
    • M/Ring 45mm (V2.3 for M).stl
    • M/Ring 48mm (V2.3 for M).stl
    • M/Ring 51mm (V2.3 for M).stl
    • M/Ring 54mm (V2.3 for M).stl
    • M/Ring 57mm (V2.3 for M).stl
    • M/Ring 60mm (V2.3 for M).stl
    • M/Ring 63mm (V2.3 for M).stl
    • S/Loyalty Cage S (v2.3).stl
    • S/Loyalty Cage S Opened (v2.3).stl
    • S/Ring 45mm (V2.3 for S).stl
    • S/Ring 48mm (V2.3 for S).stl
    • S/Ring 51mm (V2.3 for S).stl
    • S/Ring 54mm (V2.3 for S).stl
    • S/Ring 57mm (V2.3 for S).stl
    • S/Ring 60mm (V2.3 for S).stl
    • S/Ring 63mm (V2.3 for S).stl
    • XL/Loyalty Cage XL (v2.3).stl
    • XL/Loyalty Cage XL Opened (v2.3).stl
    • XL/Ring 45mm (V2.3 for XL).stl
    • XL/Ring 48mm (V2.3 for XL).stl
    • XL/Ring 51mm (V2.3 for XL).stl
    • XL/Ring 54mm (V2.3 for XL).stl
    • XL/Ring 57mm (V2.3 for XL).stl
    • XL/Ring 60mm (V2.3 for XL).stl
    • XL/Ring 63mm (V2.3 for XL).stl
    • XS/Loyalty Cage XS (v2.3).stl
    • XS/Loyalty Cage XS Opened (v2.3).stl
    • XS/Ring 45mm (V2.3 for XS).stl
    • XS/Ring 48mm (V2.3 for XS).stl
    • XS/Ring 51mm (V2.3 for XS).stl
    • XS/Ring 54mm (V2.3 for XS).stl
    • XS/Ring 57mm (V2.3 for XS).stl
    • XS/Ring 60mm (V2.3 for XS).stl
    • XS/Ring 63mm (V2.3 for XS).stl
    • XSS/Loyalty Cage XXS (v2.3).stl
    • XSS/Loyalty Cage XXS Opened (v2.3).stl
    • XSS/Ring 45mm (V2.3 for XSS).stl
    • XSS/Ring 48mm (V2.3 for XSS).stl
    • XSS/Ring 51mm (V2.3 for XSS).stl
    • XSS/Ring 54mm (V2.3 for XSS).stl
    • XSS/Ring 57mm (V2.3 for XSS).stl
    • XSS/Ring 60mm (V2.3 for XSS).stl
    • XSS/Ring 63mm (V2.3 for XSS).stl
  • Loyalty Cage V2.zip
    • Loyalty Cage L/Cage/Cage L Open.stl
    • Loyalty Cage L/Cage/Cage L.stl
    • Loyalty Cage L/Rings/Ring 1.stl
    • Loyalty Cage L/Rings/Ring 2.stl
    • Loyalty Cage L/Rings/Ring 3.stl
    • Loyalty Cage L/Rings/Ring 4.stl
    • Loyalty Cage L/Rings/Ring 5.stl
    • Loyalty Cage L/Rings/Ring 6.stl
    • Loyalty Cage M/Cage/Cage M Open.stl
    • Loyalty Cage M/Cage/Cage M.stl
    • Loyalty Cage M/Rings/Ring 1.stl
    • Loyalty Cage M/Rings/Ring 2.stl
    • Loyalty Cage M/Rings/Ring 3.stl
    • Loyalty Cage M/Rings/Ring 4.stl
    • Loyalty Cage M/Rings/Ring 5.stl
    • Loyalty Cage M/Rings/Ring 6.stl
    • Loyalty Cage S/Cage/Cage S Open.stl
    • Loyalty Cage S/Cage/Cage S.stl
    • Loyalty Cage S/Rings/Ring 1.stl
    • Loyalty Cage S/Rings/Ring 2.stl
    • Loyalty Cage S/Rings/Ring 3.stl
    • Loyalty Cage S/Rings/Ring 4.stl
    • Loyalty Cage S/Rings/Ring 5.stl
    • Loyalty Cage S/Rings/Ring 6.stl
    • Loyalty Cage XS/Cage/Cage XS Open.stl
    • Loyalty Cage XS/Cage/Cage XS.stl
    • Loyalty Cage XS/Rings/Ring 1.stl
    • Loyalty Cage XS/Rings/Ring 2.stl
    • Loyalty Cage XS/Rings/Ring 3.stl
    • Loyalty Cage XS/Rings/Ring 4.stl
    • Loyalty Cage XS/Rings/Ring 5.stl
    • Loyalty Cage XS/Rings/Ring 6.stl

Learn more about the formats
Last update 2025-03-05 at 14:40
Publication date 2023-11-02 at 10:17
Design number 1552626
Loyalty3D

Loyalty3D

Issue with this design? Report a problem.

3D printer file info

3D model description

Main Idea
In search of the best chastity cage, I decided to make my own version based on my experience as a grower but with some improvements.
The main idea was to make the most secretive chastity cage possible, but not to move the lock under the scrotum (there were attempts but they were not successful). The shape itself was inspired by Holy Trainer and KHD, but the lock was moved to be even more invisible.

Warning. If you use an FDM printer to print a model, there may be some imperfections on the model that can cut the skin, so I strongly recommend one of the types of post-processing of the printed model (sandpaper or coating). I also recommend using PETG or CoPET because of their non-porous structure and better material strength.

Changelog
Loyalty Cage V2.3 - Ergonomic and 45mm ring
Just a small changes in ergonomics: The more rounded inner wall of the ring has eliminated the possibility of painful sensations after long periods of sitting. The distance between the ring and the cage has also been increased, which reduces discomfort for the scrotum. And one more size of ring has been added - 45mm

Loyalty Cage V2.2 - Rings update
Rings:
-The angle of the ring has been changed. For greater comfort when lying on stomach.
-The shape of the bottom is slightly widened for better comfort
-The thickness is now uniform for the entire ring
-Smaller gap between the ring and the cage to reduce backlash between them

Сage:
-New ‘fully open’ design
-For sizes S-L, the inner diameter is extended to 37mm
-Uniform thickness throughout the cell
-Slightly modified shape

Loyalty Cage V2.1
- Sizing changes based on
- Rings now have sizes from 48mm to 63mm
- One additional cage size
- Inner diameter of cages now 34mm

Loyalty Cage V2
- Completely redefine cage / ring for best fit with more ergonomic.
- Now it has 4 sizes of cages and 6 rings to find your perfect cage.
- More ergonomic ring provide better comfort and prevent slipping of balls.

Loyalty Cage V1 (Legacy)
- Initial Release

Categories

Sextoys

Tags

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.