Skip to content

The Coneheads

Transformers-Coneheads-Splash-Prints-Cults.jpg The Coneheads
Transformers-Coneheads-Splash-Renders-Cults.jpg The Coneheads
Dirge Jet LP.stl The Coneheads
Dirge Pose 1 LP.stl The Coneheads
Dirge Pose 2 LP.stl The Coneheads
Dirge Pose 3 LP.stl The Coneheads
Ramjet Jet LP.stl The Coneheads
Ramjet Pose 1 LP.stl The Coneheads
Ramjet Pose 2 LP.stl The Coneheads
Ramjet Pose 3 LP.stl The Coneheads
Thrust Jet LP.stl The Coneheads
Thrust Pose 1 LP.stl The Coneheads
Thrust Pose 2 LP.stl The Coneheads
Thrust Pose 3 LP.stl The Coneheads
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
13 files (STL and ZIP) Close
  • Coneheads STL.zip
    • 40mm Road Bases/40mm road 1.stl
    • 40mm Road Bases/40mm road 2.stl
    • 40mm Road Bases/40mm road 3.stl
    • 40mm Road Bases/Lychee/40mm road 1.lys
    • 40mm Road Bases/Lychee/40mm road 2.lys
    • 40mm Road Bases/Lychee/40mm road 3.lys
    • 40mm Road Bases/ed/40mm road 1 ed.stl
    • 40mm Road Bases/ed/40mm road 2 ed.stl
    • 40mm Road Bases/ed/40mm road 3 ed.stl
    • Dirge/Dirge Jet.stl
    • Dirge/Dirge Pose 1.stl
    • Dirge/Dirge Pose 2.stl
    • Dirge/Dirge Pose 3.stl
    • Dirge/Prusa/Dirge Jet.3mf
    • Dirge/Prusa/Dirge Pose 1.3mf
    • Dirge/Prusa/Dirge Pose 2.3mf
    • Dirge/Prusa/Dirge Pose 3.3mf
    • Dirge/ed/Dirge Jet ed.stl
    • Dirge/ed/Dirge Pose 1 ed.stl
    • Dirge/ed/Dirge Pose 2 ed.stl
    • Dirge/ed/Dirge Pose 3 ed.stl
    • Flying Stands/Lychee/Short Stand 2.lys
    • Flying Stands/Lychee/Short Stand.lys
    • Flying Stands/Lychee/Tall Stand 2.lys
    • Flying Stands/Lychee/Tall Stand.lys
    • Flying Stands/Short Stand 2.stl
    • Flying Stands/Short Stand.stl
    • Flying Stands/ed/Short Stand 2 ed.stl
    • Flying Stands/ed/Short Stand ed.stl
    • Flying Stands/ed/Tall Stand 2 ed.stl
    • Flying Stands/ed/Tall Stand ed.stl
    • Flying Stands/Tall Stand 2.stl
    • Flying Stands/Tall Stand.stl
    • Ramjet/Prusa/Ramjet Jet.3mf
    • Ramjet/Prusa/Ramjet Pose 1.3mf
    • Ramjet/Prusa/Ramjet Pose 2.3mf
    • Ramjet/Prusa/Ramjet Pose 3.3mf
    • Ramjet/Ramjet Jet.stl
    • Ramjet/Ramjet Pose 1.stl
    • Ramjet/Ramjet Pose 2.stl
    • Ramjet/Ramjet Pose 3.stl
    • Ramjet/ed/Ramjet Jet ed.stl
    • Ramjet/ed/Ramjet Pose 1 ed.stl
    • Ramjet/ed/Ramjet Pose 2 ed.stl
    • Ramjet/ed/Ramjet Pose 3 ed.stl
    • Thrust/Prusa/Thrust Jet.3mf
    • Thrust/Prusa/Thrust Pose 1.3mf
    • Thrust/Prusa/Thrust Pose 2.3mf
    • Thrust/Prusa/Thrust Pose 3.3mf
    • Thrust/ed/Thrust Jet ed.stl
    • Thrust/ed/Thrust Pose 1 ed.stl
    • Thrust/ed/Thrust Pose 2 ed.stl
    • Thrust/ed/Thrust Pose 3 ed.stl
    • Thrust/Thrust Jet.stl
    • Thrust/Thrust Pose 1.stl
    • Thrust/Thrust Pose 2.stl
    • Thrust/Thrust Pose 3.stl
  • Dirge Jet LP.stl
  • Dirge Pose 1 LP.stl
  • Dirge Pose 2 LP.stl
  • Dirge Pose 3 LP.stl
  • Ramjet Jet LP.stl
  • Ramjet Pose 1 LP.stl
  • Ramjet Pose 2 LP.stl
  • Ramjet Pose 3 LP.stl
  • Thrust Jet LP.stl
  • Thrust Pose 1 LP.stl
  • Thrust Pose 2 LP.stl
  • Thrust Pose 3 LP.stl

Learn more about the formats
Publication date 2025-06-08 at 11:33
Design number 3062212
TaterBeard

TaterBeard

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

More 80's converter-bot action. this time a trio of specialists to round out the earlier Seekers set. This set of twelve models includes the evil Decepticon Jets, Thrust, Dirge and Ramjet, each with 3 poses ( Casual, action and flight) and Jet mode. Also included is a set of 40mm round road bases and a set of flight stands for the jets and flying bots. Please note, the individually ed STL files are low-poly versions, intended for preview purposes only, and as always, the Zip file contains all the high-quality STL files for all three bots, as well as my Prusa project files and the files I used to print the example models shown in the picture. I hope you enjoy this addition to your bad-guy-bot forces, and may your Coneheads take a place of pride, right beside your other seekers! Thanks again for all the , and I'll see everyone for the next !

3D printing settings

Anycubic Photon

Layer Height: .01-.03
Bottom Layer Count: 30
Exposure Time: 14 sec.
Bottom Exposure Time: 100 sec
Lift Distance: 5mm
Lift Speed: 65mm/min
Retract Speed: 150mm/min

These are the setting I used with Anycubic Grey.

Categories

Board games

Meta tags

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.