Rose Dragon, Valentine's Day Flexi Dragon

Using Bambu Studio the file had over 700 errors and had to be "repaired" I am not a fan of buying a stl which needs to be repaired. should I used the auto generated repair or is there a better method?

for those who'll be printing this. s ARE REQUIRED, there are 90 degrees cantilevers on chain links, make s on buildplate only, 9-10 degrees slope threshold. Reduce speed of overhangs to the slowest possible, 1-2mm/s for 80-90 degrees overhangs. Increase fan for overhangs if possible or run 100% for the whole print (PLA).
Brim is MUST to prevent wrapping and build plate detachment during the print.

I might be insane but i colored the Rose Dragon in Bambu Studio.so 4 colors! it took many months just cause i just worked on it here or there but im finally printing her. 22 hr because i slowed my A1 a tiny bit. 3 walls as suggested and im using some fidgets for swap tower. cross your fingers and eyes.

Hello,
you don't have a multicolor file for the rose dragon?

Did four prints from the resin file. All failed in a specific point, 8th rose from the tail.
Is there an error in the model or I am stupid?

Won't slice in Cura or Orca

Can I ask what filament brand is used in this model. I really like the filament. Love the designs

this file dose not print ive tryed it on 3printers now it gets to 10hrs of printing and it fails in the same place on all my printers.

This print need ?

What is the minimum bed size required ? Thank you

К сожалению не могу приобрести этот файл из-за сложностей с производителем банковской карты. Могу я купить этот файл на другом сайте?

Whats the difference between the Loop Legs, Curled, and Rectangle?

This printed wonderfully, as always! A word to the wise, when printed at 100% it does not fit in a scale egg 🤗 you’ll either need to scale the dragon down or the egg up. I’d love if this could be noted on the prints if they fit in eggs or need to be scaled!

when i print it, it only prints the like bottom half like sliced down the middle horizontally if that makes sense.... how do I get it to print in full? Paid for item & so far VERY UNSATISFIED

30 minutes to go and the head started to wobble and then the whole print was misaligned. ruined after 21 hours of printing!

IT IS BEAUTIFUL TACY

I'm using Cura 5.1 and am wondering if my model sliced correctly. When it finished printing the end of the tail sections did not completely connect, nor did the legs. You could see the edge of the pin that holds them in place on the bottom. Is it possible to see a picture of the bottom of the model?

cant i technically sell this cuz i payed for it

I'm printing on a snapmaker and I try very thing but the speed to print it. I don't even get the first level done before pla stick together. Any help or ideas

I ran across an error message in Cura 4.13 where it says the model is not watertight. Going to try and print anyway and see how it goes.

Hey, my partner has already purchased this file from you - it’s my very favorite dragon pattern. I love the rainbow 🌈 filament you now have pictured. Would you be willing to share what one you used by any chance ? We also bought your crystal dragon pattern :). Thank you 🙏🏼

What filament did you use in the sample picture?

it wont open file for me and i paid for it also..... can you please help me get this file to ?

Just finished the Rose Dragon, added my make. This is a beautiful model, and designed really well. Worked great on my printer. Printed in a shiny red and gold and it is gorgeous!

it wont open the file and I pay already

Are all 3 orientations the same length?

Having issues with the overhang of the head warping up hitting extruder and the print failing. Printing with pla on a taz mini

nicee

I signed up for your patron. Am I able to edit your design and give you credit for the original design of it? Also if you ever make a youtube channel showing how you make articulated designs I'd sub

what print speed did you use?